MacBook Pro (13-inch, M2, 2022)

Begin with standard prep before any hardware work: confirm the Mac model, protect data, isolate power, and document the original layout. This reduces screw mix-ups, prevents accidental shorts, and makes later component replacement safer and faster.

This procedure restores one or more keyboard keys by replacing the keycap, scissor mechanism, or related support parts. It is typically used for missing, sticky, or non-responsive keys on Mac notebook keyboards.

This procedure replaces the lower aluminum or plastic enclosure of the Mac, usually after denting, stripped screw holes, or structural damage. The job requires transferring internal parts, buttons, and brackets only as needed and confirming proper fit afterward.

This repair covers the flex cable attached to the Battery Management Unit on certain Mac models. Technicians replace it when battery sensing, charging communication, or power-related errors point to cable damage or poor seating.

This procedure covers removing and replacing the decorative and protective hinge covers at the display hinge area. Though simple, the covers can hide fasteners and fragile clips, so controlled prying and correct orientation are important.

This procedure replaces the main logic board, which controls power distribution, storage access, and most system functions. It is a major repair that requires careful cable management, thorough screw tracking, and post-installation testing.

This procedure replaces both internal speaker modules as a matched pair. It typically involves removing each speaker assembly, transferring any seals or brackets, and confirming balanced stereo output and proper acoustic seating.

This procedure involves the combined vent and antenna module found in some Mac designs, where airflow components and wireless antennas share a single assembly. Accurate reassembly is important to preserve cooling performance, signal strength, and proper cable routing.

This procedure covers removing and replacing the complete display assembly, including the panel, housing, and attached components. The work requires controlled handling because the display is large, fragile, and often connected by multiple delicate cables and brackets.

This procedure covers replacing the embedded DisplayPort flex cable along with its connector cowling or protective housing. The cowling helps align and shield the connection, so correct placement is critical to maintaining a stable display signal.

The input/output board provides external connectivity for ports and may also carry small support circuitry. Replacement usually means disconnecting several cables, removing the board from its mount, and confirming that all ports line up with the chassis cutouts after installation.

This procedure involves removing, replacing, or reseating the trackpad and its dedicated flex cable. It requires careful handling to maintain precise trackpad positioning, proper click mechanism function, and reliable communication with the logic board.

This procedure covers removing and replacing a single cooling fan in the Mac. A properly installed fan is essential for thermal management, so technicians should inspect the fan blade path, connector, and dust buildup during service.

This procedure replaces the Touch ID board or sensor assembly associated with the power button area. Because this component is security-sensitive, technicians should handle it carefully, preserve cable integrity, and confirm model compatibility before final assembly.

This procedure addresses the adhesive that secures the Touch ID board flex cable in place during disassembly or reassembly. The goal is to preserve cable alignment and insulation while restoring a clean, reliable bond without stretching or damaging the sensor connection.

This procedure involves replacing the internal audio board that manages headphone, microphone, or speaker-related connections on some Mac models. The work usually includes disconnecting several small cables, removing a compact board, and verifying clean audio output after installation.

This procedure replaces the entire top case assembly, including the battery and keyboard. It is a major repair that involves disconnecting numerous cables, removing internal hardware, and transferring compatible components only when required by the model.